Canoga-perkins 9145EMP Network Interface Device Hardware Manual do Utilizador descarregar pdf (Página 14)

9145EMP Network Interface Device Hardware User’s Manual Introduction

9145EMP Specifications

1.2 9145EMP Specifications

1.2.1 Physical Characteristics

• Dimensions: 1.75" H x 8.25" W x 11.5" D (44.5 x 209.5 x 292 mm)

• Weight: 5.5 lb (2.49 Kg), depending on model

1.2.2 Environmental Characteristics

• Operating Temperature: 0° to 50° C

• Operating Humidity: 0 to 90% Relative Humidity (non-condensing)

1.2.3 Power Requirements

• 100 VAC to 240 VAC (auto-ranging), 50/60 Hz, 0.5 Amps

• 48VDC (36 to 72VDC), 1 Amp

1.2.4 Regulatory Compliance

• EN60825-1 (laser safety)

• CE Mark

• EMC Directive (EN55022 Class A, EN 55024, EN 61000-3-2/-3-3)

• ETL, cETL & LVD (U.S. UL60950, CAN/CSA C22.2 No. 60950, EN/IEC 60950)

• FCC Part 15B Class A (U.S.), ICES-003 (CAN), VCCI Class A (Japan), C-Tick

(AS/NZS 3548 - Australia)

• NEBS Level 3

1.3 Mounting Options

• 19-Inch or 23-Inch rack mount (single unit or two units side by side in a 1U)

• Wall Mount (face down or to either side)

• Table Top

See Chapter 3, Installation, for installation procedures.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 49 50

Sem comentários

Canoga-perkins 9145EMP Network Interface Device Hardware Manual do Utilizador Página 14