Canoga-perkins 9161 Network Interface Device Manual do Utilizador

the 9161 Network Interface Device User Manual

9161 Network Interface Device 2-1 Chapter 2 Hardware Installation and Functions This chapter describes how to set up and install the 9161 and the inte

9161 Network Interface Device 2-2 Cabling for the 9161 includes the serial cable to the Terminal port, the Ethernet cable for a UTP port, and the fibe

9161 Network Interface Device 2-3Table 1. 9161 Management LEDs LED Status Description Off No power/power supply not installed Green Normal operation

9161 Network Interface Device 2-4 Remote Fault If the Extension port Rx loses the signal, it sends a Remote Fault (RMTF) signal from its Tx, the Rx LE

9161 Network Interface Device 3-1 Chapter 3 Using the Software You can manage the system through VT100 Terminal Emulation, which is accessible by a Te

9161 Network Interface Device 3-2 Set Up the PC for Terminal Operation These steps briefly describe how to set up your PC for a terminal connection.

9161 Network Interface Device 3-3 Figure 4. General Screen Format Not all screens and menus provide options that you can change. Some menu items reac

9161 Network Interface Device 3-4 1.1.13- Equipment Type 1.1.14- Vendor 1.1.15- CLEI 1.1.16- Mfg Date 1.2 Module Information This screen only repo

9161 Network Interface Device 3-51.6.9- Password Reuse Count Lockout/Logout Configuration 1.6.10- Lockout After Failed Attepts 1.6.11- Lockout Typ

9161 Network Interface Device 3-6 1.7 User Accounts 1.7.1- View/Change Account 1.7.2- Add Account 1.7.3- Delete Account 1.8 Management Packets C

9161 Network Interface Device 3-72.2 Multiple Spanning Tree Parameters 2.2.1- View/Change MST 2.2.2- View MST Status 2.2.3- Create MST 2.2.4-

9161 Network Interface Device 3-8 4.3 Traps Log 4.3.1- View Previous Page 4.3.2- View Next Page 4.3.3- Clear The Log 4.4 FDB Log 4.4.1- View Pr

9161 Network Interface Device 3-9Login and the 9161 Main Menu The first screen is the Login. If this is your initial setup and no user name or passwo

9161 Network Interface Device 3-10Managing the 9161 You can manage the hardware and software for the 9161, including communication access. Configure t

9161 Network Interface Device 3-11View Device Information The Description Report shows the current information, including the device type and software

9161 Network Interface Device 3-122. At the SNTP Client Configuration screen, type the number for a parameter and press <Enter>, then follow th

9161 Network Interface Device 3-132. At the Host Access Table screen, type 2 to add a host, then at the prompt, enter the host IP address and mask, o

9161 Network Interface Device 3-14View System Events and Traps The System Log lists all events that have occurred since the log was last cleared. The

9161 Network Interface Device 3-153. From your FTP or TFTP server, follow these steps at the DOS prompt: a. Go to the directory that holds the new s

NOTICE Canoga Perkins has prepared this users manual for use by customers and Canoga Perkins personnel as a guide for the proper installation, operat

9161 Network Interface Device 3-16• Lockout After Failed Attempts: Set how many times, from 1 to 10, that a user can try to log in before a lockout;

9161 Network Interface Device 3-17• UI Password Expires: Yes or No • UI Password Expires in (days): 0 (never) to 365 • Allow UI Lockout of User:

9161 Network Interface Device 3-18Manage Logged In Users At times, you may need to monitor which users are currently logged in to the 9161 and, if nee

9161 Network Interface Device 3-19Set Up the Notification Destination for Traps Use the Trap Notification/Destination Table to view and set up the des

9161 Network Interface Device 3-20• Privacy Protocol: Set the protocol for encrypting the notification; can be DES (authentication Protocol must be

9161 Network Interface Device 3-21ACEBD123456A small test networkACEBD123456Spanning Tree from source (C) Figure 7. Typical Spanning Tree Application

9161 Network Interface Device 3-22Check and Update Port Information The Port Information screen shows the current conditions for all ports in the 9161

9161 Network Interface Device 3-232. At the Global Spanning Tree Parameters menu, type the number for an item and press <Enter>, then follow th

9161 Network Interface Device 3-247. To set up VLAN information for a specific port, type 7, then press <Space> to select that port; and set va

9161 Network Interface Device 3-25Set Up Multiple Spanning Tree Parameters Use the Multiple Spanning Tree (MST) Instance Configuration screen to view

Check the Static and Dynamic ARP Tables The Static ARP table lets you set or change specific IP and MAC addresses for up to 10 ports. The Dynamic AR

9161 Network Interface Device 3-27/(3-22 Blank)

9161 Network Interface Device 4-1 Chapter 4 Maintenance and Troubleshooting General Maintenance and Managing Cable Links Well-maintained component

4-2 9161 Network Interface Device 3. Set the optical power meter to the proper wavelength. 4. Wait two or three minutes for the power reading to st

9161 Network Interface Device 4-3 Note: Consider this measurement when extending the link at WWDM wavelengths because the shorter wavelengths have

4-4 9161 Network Interface Device Problems With Fiber Optics If a link is down, inspect and clean the cables and connectors, then replace any damaged

9160 10 Gigabit Ethernet Network Interface Device 5-1 Chapter 5 Specifications 9161 Specifications Standards: IEEE 802.3 Dimensions: 1.72" H

5-2 9160 10 Gigabit Ethernet Network Interface Device 9161 XFP Module Model Numbers 10GigE XFP Modules XFP1-0265 10 GBase-SR 850nm MM 300m LC X

9160 10 Gigabit Ethernet Network Interface Device A-1 Appendix A Warranty Limited Lifetime Warranty Effective July 1, 2005 and After, Canoga Perkin

CAUTION! This product may contain a laser diode operating at a wavelength of 1300 nm - 1600 nm. Use of optical instruments (e.g., collimating optics

A-2 9160 10 Gigabit Ethernet Network Interface Device Limitations Canoga Perkins may at its sole discretion modify its Limited Warranty at any time a

9161 Network Interface Device B-1/(B-2 Blank) Appendix B Acronym and Abbreviation List FPGA Field Programmable Gate Array GARP General Attributes

CANOGA PERKINS CORPORATION 20600 Prairie Street Chatsworth, California 91311-6008 USA Phone: (818) 718-6300 FAX: (818) 718-6312 Web Site:

9161 Network Interface Device i Table of Contents Chapter 1 Overview...

ii 9161 Network Interface Device Chapter 4 Maintenance and Troubleshooting.....4-1 General Maintena

9161 Network Interface Device 1-1/(1-2 Blank) Chapter 1 Overview The 9161 is a 2-Port 10 Gbps Network Interface Device that provides intelligent o