Canoga-perkins 1502 Domain Management Module Manual do Utilizador Página 1

EdgeAccess Universal Chassis System Model 1502 Domain Management Module User Manual

EdgeAccess Universal Chassis System Front Panel Functions The DMM front panel includes these features (see Figure 2): • Four Status LEDs; Table 1 lis

EdgeAccess Universal Chassis System Chapter 3 Software Management Through VT100 You can manage the system with VT100 Terminal Emulation through the c

EdgeAccess Universal Chassis System Management User Interface The Management User Interface for the DMM provides screens for setup, monitoring, and di

EdgeAccess Universal Chassis System User Interface Organization The user interface consists of selectable, nested menus and screens, available in this

EdgeAccess Universal Chassis System Login and DMM Main Menu When you connect to the DMM through HyperTerminal or Telnet, the first screen is the DMM L

EdgeAccess Universal Chassis System Manage the DMM The DMM provides communication with and some controls of the various chassis and modules within the

EdgeAccess Universal Chassis System Table 4. System Configuration Report Item Description Chassis Type Always 2U, the UCS 1002 Ethernet Address MAC

EdgeAccess Universal Chassis System Table 6. IP Address Classes Class First Octet of IP Address Default Subnet MaskClass A 1-126 255.0.0.0 Class

EdgeAccess Universal Chassis System Table 7. Trap Configuration Options Trap When enabled, sends a Trap if. . . Cold Start The DMM is reset by a po

EdgeAccess Universal Chassis System • Enter the values for primary and alternate SNTP servers: • IP Address: Set the address for the server; 0.0.0.

EdgeAccess Universal Chassis System NOTICE Canoga Perkins has prepared this users manual for use by customers and Canoga Perkins personnel as a guide

EdgeAccess Universal Chassis System Test a Connection With PING When you set up a new connection or need to troubleshoot an existing connection to ano

EdgeAccess Universal Chassis System Use the Software Upgrade report and menu screen to check the current version of the DMM firmware and to upgrade so

EdgeAccess Universal Chassis System 9. If this is new firmware for another module in the domain, follow these steps when the file transfer is complet

EdgeAccess Universal Chassis System 3. At the Security Configuration screen, type the number for an item and press <Enter>, then type a value o

EdgeAccess Universal Chassis System 3. To add a user, type 1, or to edit an existing user, type 3, and press <Enter>, then type the Username an

EdgeAccess Universal Chassis System Set Up Host Access The SNMP agent allows access to up to 24 Host IP addresses listed in the Host Access Table. Se

EdgeAccess Universal Chassis System Use the Radius Client Configuration screen to set up communication with the Radius server in order to authenticate

EdgeAccess Universal Chassis System Set Up the Notification Destination for Traps Use the Trap Notification/Destination Table to view and set up the d

EdgeAccess Universal Chassis System • Authentication Key: Shows the key that authenticates the notification for MD5 or SHA Authentication Protocol;

EdgeAccess Universal Chassis System To view the System Log screen, follow these steps: 1. From the Main Menu, type 7, "Alarm/System Log," a

EdgeAccess Universal Chassis System Table of Contents Chapter 1 Overview and Management Architecture...1-1 F

EdgeAccess Universal Chassis System Table 8. Syslog Message Severity Mask Levels Severity Level Include Message Types About...and Higher Example Mes

EdgeAccess Universal Chassis System Manage the Module Code Library The Module Code Library, located in the Flash Memory so that the information remain

EdgeAccess Universal Chassis System Create and Manage Virtual Groups You can set up a Virtual Group to upgrade software or swap memory banks on two or

EdgeAccess Universal Chassis System Manage a Chassis You can manage the modules within a chassis. You can view information, such as type, status, sof

EdgeAccess Universal Chassis System CHASSIS MANAGEMENT Chassis:5 Bootcode Version Firmware Version S

EdgeAccess Universal Chassis System To access the CIM Management screen, follow these steps: 1. From the DMM Main Menu, type 5, or "Manage or ac

EdgeAccess Universal Chassis System To access the Module Menu, follow these steps: 1. From the DMM Main Menu, type 4, or "Manage or access a spe

EdgeAccess Universal Chassis System Chapter 4 Specifications Physical Specifications Dimensions 3.0"H x 1.0"W x 9.0"D (76.2 mm x 25.4

EdgeAccess Universal Chassis System Appendix A Warranty Limited Lifetime Warranty Effective July 1, 2005 and After, Canoga Perkins warrants that, at

EdgeAccess Universal Chassis System Chapter 4 Specifications ...

EdgeAccess Universal Chassis System Limitations Canoga Perkins may at its sole discretion modify its Limited Warranty at any time and from time to ti

EdgeAccess Universal Chassis System Appendix B Configuration File Fields and Defaults ### WARNING - DO NOT MODIFY THIS HEADER ### CfgFileBuiltWithFir

EdgeAccess Universal Chassis System ## Group Name <7> VirtualGroupName = ## ----- <1> VirtualGroups [ VirtualGroupChassis = VirtualGrou

EdgeAccess Universal Chassis System VirtualGroupChassis = VirtualGroupSlot = VirtualGroups ] ## End Group Name <18> End ## Group Name <19&

EdgeAccess Universal Chassis System ## Group Name <30> VirtualGroupName = ## ----- <1> VirtualGroups [ VirtualGroupChassis =2 VirtualGro

EdgeAccess Universal Chassis System SlotName(6) = SlotName(7) = SlotName = SlotName(1) = SlotName(2) = SlotName(3) = SlotName(4) = SlotName(5)

EdgeAccess Universal Chassis System SlotNameA(2) = SlotNameA(3) = SlotNameA(4) = SlotNameA(5) = SlotNameA(6) = SlotNameA(7) = SlotNameA = Slot

EdgeAccess Universal Chassis System SlotNameB(6) = SlotNameB(7) = SlotNameB = SlotNameB(1) = SlotNameB(2) = SlotNameB(3) = SlotNameB(4) = Slot

EdgeAccess Universal Chassis System ## ----- <1> HostTable [ HostTableIpMask = 172.16.2.58 /32 HostTableTelnetAccess = Telnet and SSH HostTable

EdgeAccess Universal Chassis System Index A add host access, 3-14 trap destination, 3-16 user account, 3-13 virtual group, 3-21 alarms CIM Management

EdgeAccess Universal Chassis System Chapter 1 Overview and Management Architecture The Model 1502 Domain Management Module (DMM) provides Universal C

EdgeAccess Universal Chassis System M MAC address, 3-7 menu Change Security & Passwords, 3-12 DMM Main Menu, 3-4 Domain Management Module, 3-4 Mo

EdgeAccess Universal Chassis System Set Date and Time screen, 3-8 set up terminal connection, 3-1 sideband management channel, 1-3 SIMM card function

CANOGA PERKINS CORPORATION 20600 Prairie Street Chatsworth, California 91311-6008 USA Phone: (818) 718-6300 FAX: (818) 718-6312 Web Site: w

EdgeAccess Universal Chassis System Features of the Domain Management Module The DMM, shown in Figure 2, provides these features and functions: • Com

EdgeAccess Universal Chassis System DMM Management and SBMC Depending on the number and organization of modules and chassis, DMM management can includ

EdgeAccess Universal Chassis System Security For enhanced security, the DMM supports four network security protocols: SNMPv3, Remote Access Dial In U

EdgeAccess Universal Chassis System Chapter 2 Hardware Installation and Functions This section describes how to install the DMM in the UCS Model 1002